X-Mill - X-Mill Regular Length

CDN $

336 Watline Ave.
Mississauga, Ontario, L4Z 1X2
Toll-Free: 1-888-4-De-Boer
Phone: 905-361-4303 / Fax: 905-361-4306

Promotional List Subscribe View Promotions

X-Mill - X-Mill Regular Length

The X-Mill is patent pending tool suitable for high feed rates with higher chip loads for aggressive metal removal rates, increasing tool life and decreasing machining time. Primarily suited for roughing but can give an acceptable finishing surface as well. Coating is specially designed for ultra aggressive milling. The X-Mill is also fully regrindable.

Shank Tolerance: -.0001/-.0004
Cut Diameter Tolerance: -.0005/-.0020

D1 Dia.	D2 Shank Dia.	R Radius	L2 LOC	L1 OAL	No. of Flutes	Primex Part #
1/8"	1/8"	Flat Bottom	.17"	1-1/2"	4	601-0125-401X
3/16	3/16	Flat Bottom	.42	2	4	601-0187-401X
1/4	1/4	Flat Bottom	.57	2-1/2	4	601-0250-401X
5/16	5/16	Flat Bottom	.70	2-1/2	4	601-0312-401X
3/8	3/8	Flat Bottom	.83	2-1/2	4	601-0375-401X
1/2	1/2	Flat Bottom	1.10	3	4	601-0500-401X
1/2	1/2	Flat Bottom	1.32	3-1/2	4	602-0500-401X
5/8	5/8	Flat Bottom	1.36	3-1/2	4	601-0625-401X
3/4	3/4	Flat Bottom	1.65	4	4	601-0750-401X
1	1	Flat Bottom	1.60	4	4	601-1000-401X
1/8	1/8	0.008	.30	1-1/2	4	601-0125-4R08X
3/16	3/16	0.010	.42	2	4	601-0187-4R10X
1/4	1/4	0.010	.57	2-1/2	4	601-0250-4R10X
5/16	5/16	0.015	.70	2-1/2	4	601-0312-4R15X
3/8	3/8	0.020	.83	2-1/2	4	601-0375-4R20X
1/2	1/2	0.020	1.10	3	4	601-0500-4R20X
1/2	1/2	0.020	1.32	3-1/2	4	602-0500-4R20X
5/8	5/8	0.025	1.36	3-1/2	4	601-0625-4R25X
3/4	3/4	0.030	1.65	4	4	601-0750-4R30X
1	1	0.030	1.60	4	4	601-1000-4R30X
1/8	1/8	Ball Nose	.30	1-1/2	4	601-0125-402X
3/16	3/16	Ball Nose	.42	2	4	601-0187-402X
1/4	1/4	Ball Nose	.57	2-1/2	4	601-0250-402X
5/16	5/16	Ball Nose	.70	2-1/2	4	601-0312-402X
3/8	3/8	Ball Nose	.83	2-1/2	4	601-0375-402X
1/2	1/2	Ball Nose	1.10	3	4	601-0500-402X
1/2	1/2	Ball Nose	1.32	3-1/2	4	602-0500-402X
5/8	5/8	Ball Nose	1.36	3-1/2	4	601-0625-402X
3/4	3/4	Ball Nose	1.65	4	4	601-0750-402X
1	1	Ball Nose	1.60	4	4	601-1000-402X

Website developed by Vestra Inet